Below is an overview of our most common instructions for use.
If you don’t see the manual you’re looking for, don’t worry! Let us know via our contact page and one of our colleagues will contact you as soon as possible.
PULL LOCK
Instructions
• The lock is set to 0-0-0
• Press the A button in the direction of the arrow
• While holding in the button, choose your 3-digit code by turning the wheels (B)
• Release the button to set your code
• Make sure that you do not release the button while setting the code
PUSH LOCK
Instructions
• The lock is set to 0-0-0
• Press the A button in the direction of the arrow
• While holding in the button, choose your 3-digit code by turning the wheels (B)
• Release the button to set your code
• Make sure that you do not release the button while setting the code
SUITCASE WITH A BUILT-IN SCALE
Note: Please read these instructions carefully. Observe the instructions for safe use.
Use the product with care and for the purpose for which it is intended.
Failure to do so may cause the wrong weight to display or potentially cause damage. Store these instructions for future use.
1) SAFETY INSTRUCTIONS
• Never expose the suitcase to rain or humidity. This may cause damage to the scale.
• Only use A-brand CR2032 batteries.
2) SPECIFICATIONS
• Maximum load for suitcases in size S/M/L 10/15/20 kg
• Tolerance ± 2.5 kg
• Unit on display kg, lbs
3) INSTRUCTIONS FOR USE
• Place the luggage on a flat surface, with the LCD scale screen facing upwards.
• Press the button marked ‘ON/OFF’.
• Once the number zero (0) is displayed on the LCD screen, lift the suitcase by the side handle. Hold the suitcase still for a few seconds.
• The total weight of the luggage will be displayed on the LCD screen.
• Switch off the scale by pressing the ‘ON/OFF’ button again.
• By pressing the button marked ‘KG/LBS’, the LCD display will toggle between kilograms and pounds.
4) MAINTENANCE
Check and replace the battery if the scale does not respond to the ‘ON/OFF’ button, or the display reads ‘LO’.
The battery is located on the rear side of the scale, i.e. on the inside of the suitcase. Here you will find a cover.
Slide it open to replace the battery. Pay attention to the positive/negative pole markings.
POWER BOX
The charger is removable and can also be used as a separate unit.
REMOVING THE CHARGER
Open the zipper inside the suitcase. When using it for the first time, cut off the zip tie.
Pull up the lid and slide out the charger-unit. Close and lock the sliding cover.
PLACING THE CHARGER
LOCKING THE CHARGER
Once you have removed the charger, lock the sliding cover. This will prevent somebody from placing something in your suitcase without you noticing.
